Difference between revisions of "Basic Junctions"

From #openttdcoop wiki

Jump to: navigation, search
Line 11: Line 11:
  
  
Note that there '''should be''' some sort of [[Loadbalancer|load balancing]] for trains coming from the Sideline and enter the Mainline. The Loadbalancers will be explained later on.
+
Note that there '''should be''' some sort of [[Load_Balancers|load balancing]] for trains coming from the Sideline and enter the Mainline. The Loadbalancers will be explained later on.
  
  

Revision as of 11:12, 23 March 2007

In this part we build our first junction (in #openttdcoop we always call it "hub"). Since we always build multi-track-junctions, a junction is a bit more complicated than you may have done it before. We try to build efficient and fast railways and therefore we need efficient and fast junctions as well. For the start we will analyse a so-called Sideline Hub - or SLH for short.


A very basic Sideline Hub - Note the lack of load balancing


We find several important things in the image above:


  • A mainline (also known as "Axis" goes from south to north (you can find it quite easy, mainlines have at least two tracks in each direction). The SLH has to connect a sideline to a mainline. This is the simplest case of a hub in our games. It is usually called "T-Hub" (just lean your head right and you will notice why).


Note that there should be some sort of load balancing for trains coming from the Sideline and enter the Mainline. The Loadbalancers will be explained later on.


An early Loadbalancer - recent concepts are far better but this one already improves the balancing somewhat


On the image above, you see the idea of the balancing: if a Mainline-track is used (which means: a train is on the part the Sideline-Train wants to enter) the signal state is red - and the Sideline-Train chooses the other Mainline-track.


But for now, let us come back to our topic - basic junctions.I know what you are thinking: "Why are they doing this weird things?". The answer is: because it is the simplest thing in the end. Make a clean and intelligent building right from the start - it saves you and others later on.


Just imagine a game with 300+ trains and 100+ stations and every station has its own connection to a mainline with high traffic. All this entering/leaving trains will slow down other trains - it's some kind of chain reaction. SLH's are intended to be fast connection points from sidelines to mainlines. Traffic from stations are bundled to sidelines and via a SLH they are bundled to a massive mainline. This - in the end - ensures a fast and comprehensive network!


Every hub has a name! Not only because we are gifted writers but also because of finding all these hubs in the future. On a typical 512x512 map we end up with at least four "Backbone Hubs" (explained later on) and at least eight or even more Sideline Hubs.


The signlist - klick on a sign and you will get to the spot


Since #openttdcoop has something to deal with both communication and coordination it has proven that "Look at SLH 3" is easier to communicate rather than "Look at this hub east to the hub which is west of the eastern one". This ought to be obvious.


Close signaling! Always place signals as close as possible to a track split. This prevents unnecessary red-signal-times when a train moves over a split.


The signals set as close as possible


Think big! Our trains have a certain length (depending on the current game). If it is too long to enter a Sideline it therefore blocks not only the Sideline itself but also the Mainline. On a good junction the Sideline-entry is long enough for one whole train to wait.


You can get from each direction to any other direction! Since we want to make our railline expandable, we don't want to rethink all the old hubs in the future. It is better to build a hub with as many features as possible right at the start rather than heaving a headache in the future.


A clean building style! You are not at your own - and this is probably the best thing about #openttdcoop! Unfortunately, most of us can't read your mind and therefore it is best to make a clean building style everyone understands. To be more concrete: don't do unnecessary tracks, make comments (by using signs) of your ideas. Signs do not cost anything at all - except some pressed keys on your keyboard.


Curve Radius. Depending on the game, we use a certain trainlength. Imaging a map with 3-tile-long-trains. This means: If you build curves with 3 tiles length each, the trains won't slow down! For monorail or maglev it's very important to remain at full speed. Just ask some experts around for the minimum radius for full speed-curves. Note: for larger trainlengths, you the radius is always smaller than the trainlength.


Different trainlengths afford different curve radiuses for full speed


Finally, one thing is left to say: the Mainline has always the highest priority! Keep this in your mind for the next chapters!


<< Basic Stations | Mainline Junctions >>

Powered by MediaWiki