Road Vehicle Networking

From #openttdcoop wiki

Revision as of 10:59, 21 February 2012 by Tray (Talk | contribs) (Rv networking summary based on PSg 226 and some SP testing afterwards)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Basics

Shows a basic split, works for all road vehicles.

Balacing

A major problem of all networks in Ottdcoop is balancing. A new line is only good if it gets traffic from the other lines so that the overall traffic is less dense. For roads have no signals the possibilities of road vehicle networks are very limited. The only way to split traffic is by using the pathfinders penalties. Buses don't make any penalty on buses behind them, that's why a bus never leave his road unless we force him to. The only way to penalty them is by dummy stations. One stations is a minor penalty, a station with a bus inside is a huge penalty. So it's possible to split traffic: one bus drives through one of the stations and is causing a penalty to those buses behind which choose another path and so on.

One problem of this technique is, that it's only possible to split lines with a constant stream of road vehicles. Sideline balancing has the problem that it's not possible to build any prios, so it's needed to balance sidelines by conneting them only to some of the mainlinelines.

Shows a doubled slope that doesn't slow down the main line behind.

Speed

All of the following thought are about the realistic acceleration model. The original tends to much slower buses wich is much more trouble. Might be fun might be not.

First of all curves slow down buses to around 75 percent of their maxspeed. As it's unusual to double curves the only way to avoid this problem is to avoid curves on mainlines as much as possible. The second thing is about slopes. Slowdown at slopes is related to the slopeness setting and the power of the buses so slopes might be no problem at all, if they become a problem you may double them.


Shows a basic station.

Stations

One good thing about Roadvehicleplatforms is that they can be used from both sides and roro by default. Don't use the terminus stations at all for they are shit. To keep the platform count low we should build a station design were roadvehicle can enter from both sides. Another good thing is that when one side only heads right in curves and the other side the opposite way they don't interfer each other as shown in the FPP Drop Example of PSG 226.



See also

  • There is a very nice single player game by V453000 that gives a good impression of all the discussed things.
  • The only road vehicle game we played so far is the already mentioned PSG 226.
Powered by MediaWiki