Difference between revisions of "Self-regulating Network"

From #openttdcoop wiki

Jump to: navigation, search
(New page: ==Idea== Self-regulating Networks, or SRNW for short, are a type of networks invented by the #Openttdcoop community. The idea behind it is that trains on a network share orders, so there...)
 
Line 1: Line 1:
 
==Idea==
 
==Idea==
 
Self-regulating Networks, or SRNW for short, are a type of networks invented by the #Openttdcoop  
 
Self-regulating Networks, or SRNW for short, are a type of networks invented by the #Openttdcoop  
 
 
community. The idea behind it is that trains on a network share orders, so there is a group of trains  
 
community. The idea behind it is that trains on a network share orders, so there is a group of trains  
 
 
per network and not per station. In theory, this should reduce the overhead of making sure all  
 
per network and not per station. In theory, this should reduce the overhead of making sure all  
 
 
stations have the right amount of trains. In practice, even though the network will still be divided,  
 
stations have the right amount of trains. In practice, even though the network will still be divided,  
 
 
this proves to be the case. However, it does introduce other issues.
 
this proves to be the case. However, it does introduce other issues.
  
Line 19: Line 15:
 
*one or more SRNW-type stations.
 
*one or more SRNW-type stations.
 
A model of an SRNW line is shown below.
 
A model of an SRNW line is shown below.
[[Image:srnwlayout.png]]
+
[[Image:srnwlayout.png|400x|thumb|center|Model of an SRNW line.]]
 
For the line to work, there are a few basic but important rules:
 
For the line to work, there are a few basic but important rules:
 
*Trains can only get to the drop through a pickup station.
 
*Trains can only get to the drop through a pickup station.
Line 28: Line 24:
 
==Orders==
 
==Orders==
 
All trains on a line share the same orders. On a standard line, this is just one go-to to the drop  
 
All trains on a line share the same orders. On a standard line, this is just one go-to to the drop  
 
 
station. Caution: this order can not be non-stop.
 
station. Caution: this order can not be non-stop.
 
When lines share a drop station, every group should get an entry and exit waypoint at the start and  
 
When lines share a drop station, every group should get an entry and exit waypoint at the start and  
 
 
end of the non-shared line.
 
end of the non-shared line.
  
 
==Stations==
 
==Stations==
 
The stations of the SRNW are one of its biggest drawbacks. To prevent trains from clogging the first  
 
The stations of the SRNW are one of its biggest drawbacks. To prevent trains from clogging the first  
 
 
station and driving around empty, stations should only let trains enter when there is a full load  
 
station and driving around empty, stations should only let trains enter when there is a full load  
 
 
waiting. To solve this problem, all trains have a waiting bay. This ensures that when there is a full  
 
waiting. To solve this problem, all trains have a waiting bay. This ensures that when there is a full  
 
 
load, there is a train to transport it. Furthermore, all stations have a dummy train. This dummy  
 
load, there is a train to transport it. Furthermore, all stations have a dummy train. This dummy  
 
 
full-loads, blocking the waiting train. Only when it is full and moves away to unload can a train  
 
full-loads, blocking the waiting train. Only when it is full and moves away to unload can a train  
 
 
enter the station and pickup the cargo. Even though this works, it does prove to be quite a hassle,  
 
enter the station and pickup the cargo. Even though this works, it does prove to be quite a hassle,  
 
 
especially for larger stations.
 
especially for larger stations.
 
This is an example of a simple SRNW station with one platform.
 
This is an example of a simple SRNW station with one platform.
 
[[Image:Srnwstation.png]]
 
[[Image:Srnwstation.png]]
 
A special note on the pathfinding trap: sometimes trains refuse to enter the station. This  
 
A special note on the pathfinding trap: sometimes trains refuse to enter the station. This  
 
 
construction fools the pathfinder into thinking it can reach the drop station by driving through  
 
construction fools the pathfinder into thinking it can reach the drop station by driving through  
 
 
there. Can be required on lines with a roro station or a non-reversing overflow (aka continuous  
 
there. Can be required on lines with a roro station or a non-reversing overflow (aka continuous  
 
 
track).
 
track).
 
Also, when the production grows, so should the station. This can lead to huge constructions, as  
 
Also, when the production grows, so should the station. This can lead to huge constructions, as  
 
 
demonstrated below by Mark.
 
demonstrated below by Mark.
 
[[Image:Srnwstationbig.png]]
 
[[Image:Srnwstationbig.png]]
Line 64: Line 48:
 
==Injection==
 
==Injection==
 
Injection is the system of re-introducing trains to the network. Trains from a depot, and therefore  
 
Injection is the system of re-introducing trains to the network. Trains from a depot, and therefore  
 
 
from the overflow track, are sent back onto the entry track. The easiest way to do this is to release  
 
from the overflow track, are sent back onto the entry track. The easiest way to do this is to release  
 
 
a train every X days by using a loop, a station and a little train.
 
a train every X days by using a loop, a station and a little train.
 
[[Image:Srnwsimpleinjection.png]]
 
[[Image:Srnwsimpleinjection.png]]

Revision as of 18:43, 17 February 2009

Idea

Self-regulating Networks, or SRNW for short, are a type of networks invented by the #Openttdcoop community. The idea behind it is that trains on a network share orders, so there is a group of trains per network and not per station. In theory, this should reduce the overhead of making sure all stations have the right amount of trains. In practice, even though the network will still be divided, this proves to be the case. However, it does introduce other issues.

Design

A typical SRNW line will consist of

  • a drop station, possibly shared with other line. In this case lines are split with waypoints.
  • an entrance track.
  • an exit track.
  • an overflow track.
  • an injection system.
  • one or more SRNW-type stations.

A model of an SRNW line is shown below.

Model of an SRNW line.

For the line to work, there are a few basic but important rules:

  • Trains can only get to the drop through a pickup station.
  • A train should only enter a pickup station when there is enough cargo to pickup.
  • Trains that can not enter a station overflow back to the start.
  • New trains should be introduced intermittently.

Orders

All trains on a line share the same orders. On a standard line, this is just one go-to to the drop station. Caution: this order can not be non-stop. When lines share a drop station, every group should get an entry and exit waypoint at the start and end of the non-shared line.

Stations

The stations of the SRNW are one of its biggest drawbacks. To prevent trains from clogging the first station and driving around empty, stations should only let trains enter when there is a full load waiting. To solve this problem, all trains have a waiting bay. This ensures that when there is a full load, there is a train to transport it. Furthermore, all stations have a dummy train. This dummy full-loads, blocking the waiting train. Only when it is full and moves away to unload can a train enter the station and pickup the cargo. Even though this works, it does prove to be quite a hassle, especially for larger stations. This is an example of a simple SRNW station with one platform. Srnwstation.png A special note on the pathfinding trap: sometimes trains refuse to enter the station. This construction fools the pathfinder into thinking it can reach the drop station by driving through there. Can be required on lines with a roro station or a non-reversing overflow (aka continuous track). Also, when the production grows, so should the station. This can lead to huge constructions, as demonstrated below by Mark. Srnwstationbig.png

Injection

Injection is the system of re-introducing trains to the network. Trains from a depot, and therefore from the overflow track, are sent back onto the entry track. The easiest way to do this is to release a train every X days by using a loop, a station and a little train. Srnwsimpleinjection.png This idea can be extended by

  • not releasing a new train when one has just overflown. (ODM)
  • not releasing a new train when all waiting bays are full. (Osai)
  • resetting the train release timer when a train overflows. (Mark)

Srnwtimerinjection.png Above Mark's 18.6 day injectiontimer, combining NOT-gates with actual memory.

Advantages

  • A well structured network by design.
  • High efficiency.
  • Keeping the amount of trains right just by checking the depot stock.

Disadvantages

  • Bigger stations are hard to build.
  • Takes up quite some space.
  • Only transports a few cargotypes.
Powered by MediaWiki