Revision as of 13:33, 28 December 2005

Presignal Basics

The Presignal Basics is explained here: how they work, how they behave, and how does work a terminal station, and whats the use of the combo presignal.

Part 1: Identify the signals

There is five type of signals in OTTD. If you click on a normal signal with CTRL is held, these signals will appear:

-Normal Signal: It doens`t have any special alibity, it turns to red if the next signal block is blocked by any train.

-Entry Presignal: It works like a normal signal, plus it turns to red if all exit presignals, or combo presignals are red after it.

-Exit Presignal: It works same as normal signal, but it signs for the entry, or combo signals, if self is red.

-Combo Presignal: It have Entry and Exit presignal alibities both: It turns to red if all Exit/Combo are red after it, and it signs for the Entry/Combo Presignals, if the self is red.

-PBS Signal: Not a Presignal, it enables more trains in one signal block, since PBS means Path Based Signaling. This type of signal isnt explained here.

Different signal types

Part 2: The Station Problem

Stations without any presignals have a big problem: just have a look on this Terminal Station. If you let one more train to enter into the station it will block the exit, because A signal is green. This problem is solvable with presignals: Just turn A into Entry presignal, and turn A and B signals to exit signals. Like in this picture. How it works? If Exit Presignals B, C are both red, then Entry Presignal A is red too. Then a third train cant pass trough Signal A.

Part 3: An Effective RoRo station

Combo Presignals are mostly placed between Entry, and Exit presignals, because the Combo Presignals transmits the Exit presignal signs fot the Entry Presignals. In this RORO station signal A is Entry Presignal, signals B, C, D, E are Combo ones, and F-K signals are Exit Presignals.

If F and G Platforms are used, then Combo signal B uses his Entry Presignal alibity, and it will turn to red, because F, and G Exit Presignals are both red. But the Entry Presignal A is remains green. Exit presignals H-K are green, then Combo Presignals D, E is green, then Signal C is green too. With this Combo Presignal B is red and C is green, then the Entry Presignal A is remains green. See it in in this picture.

The Entry Presignal A will be red only, if all Platforms are used, Exit Presignals F-K are red. If F-K are red, then all Combo Presignals B-E are red too, then the Entry A will be red. The Entry is red in this pic.