<< Back to Index

Now Road stations arent a big part of OpenTTD Coop's games but they do have their uses thats why I am writing this guide

2 Key Points

First things first since the RoRo road stations were introduced it is much better to use these than terminus stations. A terminus road station is as inefficient as a standard terminus rail station. 1 vehicle may enter and leave at a time which greatly reduces efficiency as with the RoRo one 2 may enter and leave at once, that 4 vehicles in play an efficiency boost of 400% if used constantly.

Now I have had my little rant about RoRo and Terminus I will proceed to my second point, routes. Routes can be created with the addition of one way roads in a recent nightly, see OpenTTD Wiki: One way roads for more details. Routing is essential if you want an efficient station. At the moment the best stations I can create for busy road stations is 150-200% as you have to force lorries in and out in 1 direction. If 1 way RoRo stations could be created where road vehicles used both sides of the road in one direction this would boost it up to 300-400%.

So your two key points

- Dont use Terminus stations
- Always route traffic

Traffic Congestion

To create a good station you need to have enough bays now this is individual to each instance of a road station and must be played about with accordingly.

My station concept requires minimal station walking but not in the traditional sense it requires a 1 tile space between each station and its neighbours.

Gaps must be placed between station tiles

When stations are completed delete walkers. Then place roads to link stations and link roads through the gaps you created For this next image I expanded my station slightly

Completed without routing

This as you may have noticed doesnt have routing and so I will build in routing West to East.

Completed with routing

Exits and Entrances

Where to put them in and pull them out! This decision is one of the most important as it determines whether traffic piles up or flows smoothly

I so far have found that Big stations require a different pattern to little ones. For big stations it is good practice to put vehicles in at one corner on one side and pull them from the opposite corner like so.

Big station In/Out

Also I find it is good practice to note at both ends of Entry/Exit roads the direction in which they travel

This is my design for a small industry pickup (for a big pickup copy the above design scaling station numbers as required)

Small Industry pickup

In most cases where 3-9 lorrys are using this station the one way road piece can just be normal road

If the Exits/Entrances dont work well try placing them centrally on the station sides

Real Examples

Courtesy of Public Server game 52 (which as I am writing this is in action) I have a couple of my real stations

Firstly a big pickup at a forest. Some may argue it doesnt need to be this big and I would agree but as I built it with the aim to accomodate the level of trucks in service its just right and looks alright. It also has a second entrance coupling this was to more evenly distribute lorries as they seemed to pile up on the first row of stations

A real pickup station (big)

And this is the resulting drop, unusually it has a small forest attached which has another station with lorries running between the two and it is smaller than the pickup but copes well with a good flow rate.

The drop for wood

Final Word

Of course I only have my experience so far and will be investigating these items further to further increase the quality of this guide but I hope you have found it useful.

Sedontane 16:25, 26 July 2007 (UTC)