Intro

In an attempt to reduce the number of bridges and crossings in a Backbone Hub, you can try something like a Pivot BBH where the traffic rotates around a central pivot point. For example, in the figure below, a LL_RR 3-way BBH is built using this concept.

An example compact Pivot BBH

Key Features/How to Build

As you can see above, the traffic rotates around the central area in a counter-clockwise fashion. Every input will first cross over one set of tracks, and then be crossed over by another set of tracks. During the first cross over, the input splits to send trains to both outputs.

• First, pick where the pivot will be, that is the center of the hub
• Then, choose any input. You will lay track from this input to the output of the hub TO THE LEFT of the input you choose. Lay the track so it passes to the right of your pivot point, then turn the track so it heads to the desired exit.
• Remember - all traffic must go counter-clockwise around the pivot!

Additional Examples

Rather than having the tracks split and re-koim after crossing another line, you can keep them split and use the already split lines for a balanced merge.

Example of a Pivot BBH without rejoining

Here is the first built example of a Pivot BBH from PSG 317

Example of a Pivot BBH