Difference between revisions of "Junctionary - Stations - All"

From #openttdcoop wiki

Latest revision as of 12:40, 29 September 2011

Stations
	All Stations
	Basic Stations
	Pickup Stations
	Drop Stations
	Combined Stations
	SRNW Stations
	Back to Junctionary
	Back to Stations

Basic Stations (what is that?)
Date	Screenshot	Specification	Description	Creator	additional
27.07.07			RoRo entrance for a 2-lane ML.	s_m_w	Notice that trains on both lanes can access all platforms
13.08.08			Balanced Presignal Bypass Station	thomashauk	A combination of the two above, the diagonal lines in avoid sharp corners. Notice the PBS for the balancer and the room left for queuing.
16.04.08			RoRo exit for a 2-lane ML. Notice that trains from each platform can enter each ML. Also they have a complete TL before the "X" so that a train can always leave the station properly before it may stop again	planetmaker	Public Server game #89
2009-03-12		Pre	Basic Pre-signal Terminus Station	KenjiE20	Very low throughput
2009-03-12		PBS	Basic PBS-signal Terminus Station Note the lack of signals on platforms, PBS takes care of that automatically	KenjiE20	Moderate throughput
2009-03-12		PBS	Mildly complex Multi-line Terminus Station NOT recommended under normal circumstances, but when space/money/Terra-forming is an issue this can be a good stop-gap Note use of only diagonals to avoid blocking from crossing trains	Thijs --TBC	Should set path_backoff_interval=1 or 2 if you use this
2009-04-14		PBS	A highly flexible Single or Multi-line Terminus Station Can be fit around the landscape with relative ease	Unknown (Various)	Moderate/High throughput
03.12.2009		Osai Terminus	Typical terminus without an X.	Osai	Download PSG #106
03.12.2009		2way eol	An extremely simple drop station to build. Has no balancing but can have any amount of platforms while keeping maximum throughput. Braking spaces in front of platforms are essential.	V453000, ralph	Download PSG #186
03.12.2009		PBS + 2way signals	A relatively simple yet interesting station using PBS and pre-signals. The PBS is used on the first split to make it not ask whether platforms are full, but whether spaces in front of PBS are empty. The PBS was required because the right choice would not fit a TL3 inside so the half tile PBS provided was needed.	V453000, intexon	Download PSG #196
03.12.2009		Combo signal X-less terminus	Osai's station copied in psg 198. It has a big disadvantage of using multiple combo signals for one block thus is possible to block if two trains go to the same destination.	Osai	Download PSG #198
03.12.2009		Basic overflow	Very simple to build overflow useful for small primary pickups which gained it's popularity very quickly for being small and simple.	V453000	Download PSG #209

Drop Stations (what is that?)
Date	Screenshot	Specification	Description	Creator	additional
11.01.11		2way eol	The 2way eol feature plays a key role in this station. Trains try to join a platform and the 2way signals divert them if the platform is full.	unknown	Download PSG #131
11.01.11		PBS semi-balancing	This station looks very messy but due to the fact that it allows trains to choose from many paths, it works. It does not allow all trains go to all platforms though.	Chris_Booth	Download PSG #136
11.01.11		Tunnel Exit	In the exit of the station tunnels are used and another set of platforms is fit in there. This not only looks awesome but it also uses the tunnels as waiting space behind platforms for trains so the exit is faster.	tneo	Download PSG #142
11.01.11		2 sides	This technically is quite a normal station. But the key difference is that it is halved and each part enters from one side, making the entrance much smaller and thus work much better.	Farden	Download PSG #156
11.01.11		Symmetric Terminus	Technically simple unbalanced terminus, visually a truly wonderful station.	ODM	Download PSG #147
11.01.11		Unbalanced Terminus	A nice terminus station in a cute shape. As it uses a single entrance signal, it uses penalties (the road crossings) to make trains prefer platforms which are far away from the first split aka the so called valhallasw style.	^Spike^	Download PSG #156
03.12.2009		Packer Exit	A special drop station featuring a packer based on using slow bridges to get trains in correct positions.	Osai, ^Spike^, Phazorx, V453000	Download PSG #170
11.01.11		2wayeol in V shape	A terminus using 2way eol, having balanced exit and being in a special shape.	V453000	Download PSG #175
10.08.11		Ultimate Mess	An extremely messy station which actually worked which ended up being quite incredible.	OwenS	Download PSG #177
10.08.11		Balanced Station	A balanced station with a bit atypical yet working entrance.	XeryusTC	Download PSG #184
10.08.11		Halved overflow	A special station consisting of 2 parts. Trains try to pick a platform on their part and in case they fail they move to the other part. This station has a downside of problems with balancing and in this case was supported by flipflop logic.	^Spike^	Download PSG #189
11.01.11		Reverser Exit	The exit of this station is particularly interesting due to saving space by reversers.	thgergo	Download PSG #190
11.01.11		'2way eol	Trains simply pass around 2ways, however in a nice shape. If they do not find a free platform, they just loop into another line.	Intexon,V453000	Download PSG #195
11.01.11		'Two-way station with loop entrance	A bidirectional station where trains pass around waiting bays until they find one. And if they don't find one on the line they came from, they will try another line.	V453000	Download PSG #196
11.01.11		Reverser Entrance	This station uses reversers in station entrance. Note the need of PF trap to make trains "know" the path to station.	V453000	Download PSG #197
11.01.11		2 in 1 out Terminus	This station is a bit different due to using 3-tile X while 2 tracks go in (from each incoming track one) and one track goes out. A nice and easy way how to simplify balancing a terminus station with 2 lines.	V453000	Download PSG #197
11.01.11		Balanced station	This station has a few interesting points. Aside from the fact that it is huge, it balances all 4 lines into double "X"s which forces it to also use a lot of bridges atop of tunnels..	V453000	Download PSG #200
11.01.11		X-less Terminus	One of the terminus stations which lacks the "X" many people fear.	V453000	Download PSG #204
11.01.11		Looping station	This station is basically a normal 2way eol ro-ro but with the difference that trains which fail to find a platform try again on a different line which lets us use less platforms per line.	V453000	Download PSG #206
10.08.11		Balanced Station	One of the typical balanced stations with various exit techniques.	XeryusTC	Download PSG #210
10.08.11		2 platform rows	The main point of this station is to have many platforms. Therefore very fitting to use in maglev games as seen in the picture.	V453000, MrD2DG	Download PSG #211
19.11.11		Unbalanced two-way drop	This station is focussed on high throughput. By forcing trains in to the nearest platforms no pre-signals are needed. In this case penalties by road crossings are used in combination with two-way signals.	Xotic750, V453000	Download PSG #219
12.1.12		Semi-balanced drop	Sometimes it is just enough to make two 2 line entrance than a full balancing of 4 lines. Also note small signal gaps for high throughput.	V453000	Download PSG #223

Pickup Stations (what is that?)
Date	Screenshot	Specification	Description	Creator	additional
03.12.2009		Fail-safe	This station uses the same logic as fail-safe joiners do. Making combo multiple combo signals leading to 1 signal block not break. As a result, it looks .. well ... this way. ;D	V453000	Download PSG #193
03.12.2009		Overflow	An overflow with side detection of waiting bays and most notably with an escape route for lost trains. (when a lost train gets to the overflow, it would not see a path out through the terminus station and would stay stuck in the overflow forever, eventually would get hungry and die)	V453000	Download PSG #197
03.12.2009		Overflow	Overflow based on detecting platforms. Also featuring an escape route for lost trains.	V453000	Download PSG #197
03.12.2009		Overflow	A pickup station with quite an advanced overflow. NO, it is not presignal bypass! This combo signal arrays always checks if there is a train going to a platform and if the eventual platform is free. If there is a train, it is possible that this train would go to any other platform down the line and the overflow is not released. If there is no train but the waiting bay is full, the combo signals move onto checking the next waiting bay.	V453000	Download PSG #204
03.12.2009		Balanced station	A standard powerful balanced station.	XeryusTC	Download PSG #210
03.12.2009		Overflow	A bit special overflow on a balanced station. Using block pre-signals to give some priority to the incoming trains which have PBS.	V453000	Download PSG #219

Combined Stations (what is that?)
Date	Screenshot	Specification	Description	Creator	additional
11.01.11		Drop and pickup station	Here goes a typical Mark station with X-less terminus and a _ton_ of eyecandy.	Mark, Skasi	Download PSG #90
11.01.11		City station	Wonderfully looking city station.	Mark	Download PSG #105
11.01.11		Refit Station	A very simple refit station.	Combuster	Download PSG #141
11.01.11		PBS WTF	This pax terminal is very interesting by providing as few colliding paths as possible.	unknown	Download PSG #151
11.01.11		Tunnel bypass	This transfer station is special by the bypass for ML trains which is situated in tunnels under station.	Combuster	Download PSG #159
11.01.11		Double X-less Terminus	The one typical station for Mark. A terminus without X on the "main" side and the other station fitting into it. Awesome on the sight!	Mark	Download PSG #164
11.01.11		Refit Station	The first refit station with cargo return - on separate platforms.	V453000	Download PSG #186
11.01.11		Reverser Exit, tunnel under station	This station is trying to save space for towns by reversers in tunnels and tunneled exit from the station.	V453000	Download PSG #187
11.01.11		Space effectiveness	This was a double-station where trains transferted at one, loaded at the other. As the game had gotten many lines, the main challenge was to put the station within 64 tiles of station spread.	V453000	Download PSG #192
11.01.11		Refit Station	A refit station with cargo return on the same platforms long TL+1, using the [near end] and [far end] orders.	V453000	Download PSG #197
11.01.11		Transfer station	A terminus transfer station using a kind of X-less PBS entrance/exit..	V453000	Download PSG #200
11.01.11		Refit Station	A refit station with cargo return by TL+1 platforms and all platforms shared for all actions, be it drop, pickup or cargo return.	V453000	Download PSG #200
11.01.11		Pax terminal	A very special station using one ML underground and the station on the surface. Also note the extremely important message on it.	V453000,mfb,sturmi	Download PSG #201
11.01.11		Refit Station	A very advanced refit station being not only balanced but also featuring cargo return by TL+1 platforms and mainly stac-proof depots.	V453000	Download PSG #205
11.01.11		Merged pickup and drop	Every 2 platforms swap being drop/pickup. Quite an interesting way how to make a station.	V453000	Download PSG #211
11.01.11		Merged pickup and drop	First drop, then pickup. That is how this station works when trains pass around the 2way eol. However the most interesting thing on this station is the exit. Using PBS and 2way entry signals helps trains decide which line to choose without unnecessary waiting in waiting bays. Also note that each choice fork is made after just 3 platforms so the throughput of each fork is quite low.	V453000	Download PSG #216
20.12.2011		ICE station	Special design to make one side of the station drop passengers to the town and the other side load them to the next town. Entry and exit from two directions..	LoPo	Download PSG #221
26.12.2012		Multiple pickup and drop	Using one incoming line for all of the pickup platforms is not the sanest idea. However throwing drop platforms in the mix made it a bit easier as they made more space for the overflow logic for pickups. It still made for a bridge/tunnel madness.	V453000	Download PSG #222

Special Stations (what is that?)
Date	Screenshot	Specification	Description	Creator	additional
03.12.2009		SRNW Station	A nice SRNW station from the legendary psg 121. A so-called 3-bay SRNW station where dummy trains load, wait for other dummies to load, and then all dummies go to unload. The "waiting" part is usually solved by having 1TL waiting bay for those trains. However in this case it is smartly solved by using a NOT gate, effectively shortening the waiting bays to 1 tile.	Mark	Download PSG #121
03.12.2009		SRNW Station	A SRNW station using PBS to release trains.	Nickman	Download PSG #149
03.12.2009		SRNW Dummy	A NOT gated dummy SRNW station using platforms tightly together thanks to the mess on the exit.	V453000	Download PSG #172
03.12.2009		SRNW PBS Dummy	Not too complicated SRNW station as in system, but effective on space. Making many platforms just next to each other. It is wonderful to watch when all trains release together, but at the same time it is a bit painful to see the huge wave of trains flood the network. :) (psg180 had no issue with waves due to the flipflops fortunately)	V453000	Download PSG #180
03.12.2009		SRNW Dummy	A very simple SRNW station with just a few 3-bay dummies and full-TL waiting bays.	V453000	Download PSG #180
03.12.2009		SRNW Transfer	A transfer station fitting in SRNW network. After using some intense madness, it worked absolutely properly. Question is whether this amount of logic is worth it as the total throughput is not that stunning.	V453000	Download PSG #200
03.12.2009		SRNW Refit	A SRNW quadruple station. Uses refit orders between quarters, dummy trains with NOT gates, Mark's clock for overflow injection.	V453000	Download PSG #214
13.1.2011		SRNW Transfer	Station based on having 1 set of platforms used by both feeder and pickup trains. Each platform gets its own logic consisting of (only) 2 logic gates - NOT and a green->absolute red. Unfortunately requires huge amount of logic wires so making it small is an issue.	V453000	Download PSG #223
17.1.2011		SRNW Transfer	A transfer station which counts trains using (insane amount of) binary logic. Unfortunately some trains manage to run away without loading.	mfb	Download PSG #223
14.7.2012		SRNW Transfer	Yet another Self Regulating Transfer Station. The network trains are blocked by the reserved track by the feeder train - using PBS. Release then occurs when the feeder train reversed, and leaving the transfer station. With this mechanism, only a single logic "check" was needed to make this transfer working. Beside this, the station was also equipped with overflow depots for every cargo type.	LoPo	Download PSG #239
14.7.2012		SRNW Station	A SRNW station design with double Not-Gates. The first Not-Gate is to release the dummy trains - it will give a green signal when all dummy trains are loaded. This will then give a red signal to the second Not-Gate; which then releases the network trains.	LoPo	Download PSG #239
14.7.2012		SRNW Station	This new SRNW station design uses no Logic Gates, it uses some kind of cascade mechanism. The design is fully reliant on PBS. The first set of Path Signals make sure that the dummy trains block the network trains. The second set of Path Singals are needed to block the dummy trains, one for each other next to them, until all dummy trains are loaded. The last set of Path Signals is needed to block the dummy trains until they are all unloaded. When using this station, please make sure you really know how it works (it can break really easily), also it may occur that the last dummy loader is loaded at the same time as one of the others. This will also break the system, and thus meaning it needs expansion (the station will break if the production is to high for the dummy trains).	LoPo	Download PSG #239

Retrieved from "https://wiki.openttdcoop.org/index.php?title=Junctionary_-_Stations_-_All&oldid=12772"

Category:

Junctionary

Revision as of 07:19, 24 March 2011 (view source) V453000 (Talk \| contribs) (ALL stations page started)		Latest revision as of 12:40, 29 September 2011 (view source) Imus (Talk \| contribs) m (removed white space)
(One intermediate revision by one other user not shown)
Line 1:		Line 1:
		+	<noinclude>{{JunctionaryStationsMenu}}</noinclude>
	{{:Junctionary_-_Stations_-_Basic}}		{{:Junctionary_-_Stations_-_Basic}}

The #openttdcoop Wiki

Difference between revisions of "Junctionary - Stations - All"

From #openttdcoop wiki

Latest revision as of 12:40, 29 September 2011

Views

Personal tools

#openttdcoop

servers

games

concepts

Navigation

Tools